Turbo timer how does it work




















Take your interior for instance- you have yet another electronic device besides your deafening entertainment system and an assortment of after market gauges. But really, what does it do? As the name suggests, a turbo timer induces your snail to cool down after you drive your vehicle hard.

It is imperative for the engine to run at idle speed for a small period of time, allowing the turbo intake and exhaust compressors to cool down.

This is enabled by proper oil circulation from the engine that is otherwise not possible if you shut off the motor immediately after parking the vehicle.

If you shut off your engine after a hard run, the hot engine oil that is trapped between the turbo compressors breaks down into carbon deposits around the bearing leading to poor circulation in the future, blown seals and eventually scoring and failure of the turbo. Does your turbo go kaboom if there is no turbo timer? The whole point of the turbo timer is to "automatically" keep the engine running for a wee bit so that your engine internals and the turbo can catch a breath and cool down before shutting down.

You can opt NOT to have a turbo timer and do the above manually. R6RY D posts months. Most turbos are water cooled now, which the OEM's introduced to improve the longevity of the bearings. Rather than pump the oil round after shutdown, a technically easier approach is to continue pumping the water around, which many OEM's also do - called after-run pumps - my mates audi S4 amongst many employs one as standard.

And is something I may fit to mine as some point in the future. Wastegate: Diverts hot exhaust gas from passing through the turbine the hot side to control compressor speed and therefore boost pressure. Dump valve: Dumps boost pressure that builds up in the inlet tract between the turbo compressor and the throttle plate.

Extreeme cases - read very high boost pressures My dump valve cost 1p from ebay and works well. What are all the functions and benefits of turbo timer? Functions of the turbo timer: A turbo timer allows you set the timer based on the requirements when you would wish to have your vehicle engine to shut off and also leave it after parking.

Other functions of the turbo timer: When the turbo timer is used in your vehicle, it usually continues to properly circulate the oil through the center posture of the turbo charger after a vehicle has been shut off. It is really very helpful to reduce the heat and preventing the oil around the bearing from cooking into the coking which is also known as the hard crust that cause the bearing and thus the turbo to fail.

Oil coking is as well as removed by the foil bearings. With this system, the engine starts without inserting a key to the key cylinder. The timer functions by connecting to the CPU controlling the body that differs to the key cylinder type. Product Information: Click Application: Click. Is there anything else other than timer harness for installation?

What is causing this? Please check if the gray colored timer wire parking brake wire is properly wired. I am trying to install Turbo Timer, could you tell me correct wire colors?



0コメント

  • 1000 / 1000